Latest posts

Cell cabinets

Your place between the service columns

EXPLORIS® cell cabinets provide additional space between the columns for utensils such as reagents and small equipment. Another advantage with a double worktable is the access from both sides.

Cell cabinets

Your place between the service columns

EXPLORIS® cell cabinets provide additional space between the columns for utensils such as reagents and small equipment. Another advantage with a double worktable is the access from both sides.

Access from both sides on island bench

Optional glass doors for a light, transparent appearance

Closed front for a uniform and orderly overall appearance

Made of electrolytically galvanised steel

Colour: Arctic White, similar to RAL Design 260 90 05

Maximum storage space on minimum laboratory area

Access from both sides on island bench

Optional glass doors for a light, transparent appearance

Closed front for a uniform and orderly overall appearance

Made of electrolytically galvanised steel

Colour: Arctic White, similar to RAL Design 260 90 05

Maximum storage space on minimum laboratory area

	Width	Height	Carcass depth
Open	600/900/1200/1500	480/630	450
With hinged doors	600/900/1200/1500	480/630	450
With sliding glass doors	900/1200/1500	480/630	450

Dimensions in mm

Product data

Cell cabinets are available with open design, hinged doors or sliding glass doors. The glass doors create a light, transparent appearance. Here you can find the data for the different design variants.

Worktops

As diverse as your requirements

The work in the laboratory is very diverse. Corresponding requirements must also be met with regard to EXPLORIS® worktops. Ten different materials are available for the various requirements.

Worktops

As diverse as your requirements

The work in the laboratory is very diverse. Corresponding requirements must also be met with regard to EXPLORIS® worktops. Ten different materials are available for the various requirements.

Five variants have a marine edge to contain spilled liquids

Rectangular and octagonal shapes available

Colours: Baltic blue, white, grey, stainless steel and others on request

Five variants have a marine edge to contain spilled liquids

Rectangular and octagonal shapes available

Colours: Baltic blue, white, grey, stainless steel and others on request

Product data

The harmonious colour matching of table tops and furniture creates a creative atmosphere. You can find the different designs and resistances here.

Underbench cabinet

Utensils always ready to hand

Where to go with all the things you need in the lab? It is best to have them at hand directly under the worktop. Mobile as a cabinet on castors, suspended in frames or with steel pedestal – EXPLORIS® underbench cabinets offer customized storage space.

Underbench cabinet

Utensils always ready to hand

Where to go with all the things you need in the lab? It is best to have them at hand directly under the worktop. Mobile as a cabinet on castors, suspended in frames or with steel pedestal – EXPLORIS® underbench cabinets offer customized storage space.

Flexibly and individually configurable

Customized storage space as a mobile cabinet, frame base cabinet or solid with a steel plinth

Available as C-frame or A-frame underbench cabinet

Worktops matched to your requirements

Made of electrolytically galvanised steel

Colour: Arctic White, similar to RAL Design 260 90 05

Various possible combinations of doors and drawers

Noise-insulated doors in double-shell design

Flexibly and individually configurable

Customized storage space as a mobile cabinet, frame base cabinet or solid with a steel plinth

Available as C-frame or A-frame underbench cabinet

Worktops matched to your requirements

Made of electrolytically galvanised steel

Colour: Arctic White, similar to RAL Design 260 90 05

Various possible combinations of doors and drawers

Noise-insulated doors in double-shell design

	Width	Height	Carcass depth
With steel plinth	450/600/900/1200	720/870	350/500
With steel plinth for front sink	300	720/870	500
With castors	450/600/900/1200	580/730	500
For installation in frames	450/600/900/1200	480/630	500

Dimensions in mm

Product data

Depending on the table frame (type, height, width) or the type of use, various underbench unit variants are available. The different types with dimensions can be found here:

Tall cabinet

Lots of room for equipment and utensils

In order for everything to find its place in the laboratory, EXPLORIS® tall storage cabinets can be individually configured. EXPLORIS® offers a comprehensive range of tall storage cabinets so everything fits in the laboratory.

Tall cabinet

Lots of room for equipment and utensils

In order for everything to find its place in the laboratory, EXPLORIS® tall storage cabinets can be individually configured. EXPLORIS® offers a comprehensive range of tall storage cabinets so everything fits in the laboratory.

Different versions that meet your needs

Flexible interior configuration with height adjustable
shelves and convenient pull-outs

Additional storage space with top-mounted cabinets

Made of electrolytically galvanised steel

Colour: Arctic White, similar to RAL Design 260 90 05

Double-shell designed and sound insulated doors

Different versions that meet your needs

Flexible interior configuration with height adjustable
shelves and convenient pull-outs

Additional storage space with top-mounted cabinets

Made of electrolytically galvanised steel

Colour: Arctic White, similar to RAL Design 260 90 05

Double-shell designed and sound insulated doors

	Width	Height	Carcass depth
Without doors	600/900/1200	1920	350/500
With hinged doors	600/900/1200	1920	350/500
With sliding glass doors	900/1200	1920	350/500
Display cabinet	900/1200	1920	350/500
Wardrobe cabinet	600	1920	500
With pull-out door	300/600	1920	500

Dimensions in mm

Product data

The selection ranges from open shelves to cabinets with wing or glass sliding doors, display cabinets and cabinets with backdrop pull-out and wardrobe cabinets. Here you will find the data for the different design variants.

Wall and top-mounted cabinet

Utilise free space

Even with little laboratory space, there is still room at the top for the storage of work material. EXPLORIS® wall- and top-mounted cabinets make optimal use of this space and solve any space problem.

Wall and top-mounted cabinet

Utilise free space

Even with little laboratory space, there is still room at the top for the storage of work material. EXPLORIS® wall- and top-mounted cabinets make optimal use of this space and solve any space problem.

Maximum storage space in minimum laboratory space

Diversity of variants

Suitable for Köttermann service walls

Made of electrolytically galvanised steel

Colour: Arctic White, similar to RAL Design 260 90 05

Optionally with practical ladder for top-mounted cabinets

Maximum storage space in minimum laboratory space

Diversity of variants

Suitable for Köttermann service walls

Optionally with practical ladder for top-mounted cabinets

Colour: Arctic White, similar to RAL Design 260 90 05

Made of electrolytically galvanised steel

	Width	Height	Carcass depth
Top-mounted cabinet for tall cabinet	600/900/1200	480/630/780	350/500
Wall-mounted cabinet for installation between the columns of island benches	600/900/1200/1500	480/630	350
Wall-mounted cabinet with hinged doors	450/600/900/1200/1500	480/630/780	350
Wall-mounted cabinet with sliding glass doors	900/1200/1500	480/630/780	350
First aid cabinet	450	480/630/780	350
Equipment cabinet	300	480/630/780	350

Dimensions in mm

Product data

Whether they are to be mounted above the workstations or add-on units on top of the tall cabinets – here you will find all design variants with dimensions.

Bench type fume cupboards

All-rounders for general use

Ideal for working with organic solvents and cold or diluted acids. Depending on the ceiling height of your laboratory, you can choose between tall or low designs.

Bench type fume cupboards

All-rounders for general use

Ideal for working with organic solvents and cold or diluted acids. Depending on the ceiling height of your laboratory, you can choose between tall or low designs.

Fume cupboard for low ceiling height with unique low installation height (2250 mm)

Above-average usable worktop depth

Underbench storage for tall utensils up to 720 mm

Metallic construction enables columns with hollow spaces at the front – for easy maintenance and protection against air leakage

Interior: coated steel, optional lining in Trespa®

Side or front service connections for easy tapping of water, gas, etc.

Fume cupboard for low ceiling height with unique low installation height (2250 mm)

Above-average usable worktop depth

Underbench storage for tall utensils up to 720 mm

Metallic construction enables columns with hollow spaces at the front – for easy maintenance and protection against air leakage

Interior: coated steel, optional lining in Trespa®

Side or front service connections for easy tapping of water, gas, etc.

koettermann-abzug_abmessungen-image-Tischabzug

Width	1200	1500	1800	2000	2100
Front height	2300/2550	2300/2550	2300/2550	2300/2550	2300/2550
Chamber height	2300/2600	2300/2600	2300/2600	2300/2600	2300/2600
Depth	900	900	900	900	900
Usable space width	1100	1400	1700	1900	2000
Usable space height	1190/1490	1190/1490	1190/1490	1190/1490	1190/1490
Usable space depth	800	800	800	800	800
Work height	900	900	900	900	900
Minimal permissable volume flow rate*	450	530	680	800	800
Specified volume flow rate	480	600	720	840	840
Maximum permissible volume flow rate	1500	1500	1500	1500	1500

Dimensions (mm) / Volume flow rate (m³/h)
* Alarm value

Your work is what matters

When selecting a fume cupboard, the most important considerations are the activities you do and the substances you use.

Fume cupboards for general use with cemical-resistant Trespa Toplab VERTICAL® lining

Organic solvents

Weak acids

Diluted mineral acids

Cold concentrated mineral acids

Hot concentrated mineral acids

Hydrofluoric acid

Radioactive substances

High thermal load

= Suitable

= Occasional use

= Not suitable

Product data

The certification according to DIN EN 14175 part 2 and 3 allows EXPLORIS® fume cupboards for general use to be used universally in the laboratory. Below you will find all information about dimensions and volume flow.

Fume cupboard control TouchTronic

Easy operation of fume cupboards

As a control element for a wide range of functions, the new TouchTronic combines fume cupboard control and monitoring with high computing power. The combination of work steps in one unit saves time and also protects everyone else in the lab: warnings can be easily shown on the display. Even when wearing gloves, the IPS touch screen recognises the touch.

Fume cupboard control TouchTronic

Easy operation of fume cupboards

Single tables, weighing tables and frames

Mobile, load-bearing, extremely precise

Work place, storage space or footprint for test setups and devices – EXPLORIS® benches fulfil a variety of tasks in the laboratory. If fixed, they can be flexibly adjusted in height and adapted to uneven floors. On castors, they enable mobile working and the transport of heavy equipment.

Single tables, weighing tables and frames

Mobile, load-bearing, extremely precise

Work place, storage space or footprint for test setups and devices – EXPLORIS® benches fulfil a variety of tasks in the laboratory. If fixed, they can be flexibly adjusted in height and adapted to uneven floors. On castors, they enable mobile working and the transport of heavy equipment.

Versatile single tables with and without castors with a load capacity of up to 300 kg

Also available as a heavy-duty bench for point loads up to 200 kg or surface loads up to 400 kg

Available as a-, or c-frame table and underbench unit

Variants for octagonal worktops and underbench cabinets
from 90° to 360°

For vibration-damped weighing, available as free-standing or for integration in a bench arrangement

Available for sitting and standing work height

Versatile single tables with and without castors with a load capacity of up to 300 kg

Also available as a heavy-duty bench for point loads up to 200 kg or surface loads up to 400 kg

Available as a-, or c-frame table and underbench unit

Variants for octagonal worktops and underbench cabinets
from 90° to 360°

For vibration-damped weighing, available as free-standing or for integration in a bench arrangement

Available for sitting and standing work height

	Width	Height	Bench depth
Single bench without castors	900/1200/1500/1800	750/900	600/750
Single bench with castors	900/1200/1500/1800	750/900	600/750
Heavy-duty bench	1200/1500/1800	750/900	600/750
Balance bench, free-standing	900	750/900	600
Balance bench, built-in	approx. 900	750/900	-

Dimensions in mm

Product data

Whether heavy-duty tables, single tables with or without castors or weighing tables as experts for vibration-free measuring, here you will find all the data and design variants of our laboratory single tables.

Basins and sinks

Your access to water

Wherever water is used in the laboratory, practical solutions are required. Whether EXPLORIS® basins or complete sinks - all depends on the work processes and the space available.

Basins and sinks

Your access to water

Wherever water is used in the laboratory, practical solutions are required. Whether EXPLORIS® basins or complete sinks - all depends on the work processes and the space available.

Available in four different materials for basins

Adapted to existing standards in the laboratory.

Various combinations of basins and worktop materials

Sink workstations with water taps and fittings,
draining racks, soap and towel dispensers and eyewash stations for first aid.

Different installation types, such as flush installation, fitted with marine edge, underslung and welded without joints

Available in four different materials for basins

Adapted to existing standards in the laboratory.

Various combinations of basins and worktop materials

Sink workstations with water taps and fittings,
draining racks, soap and towel dispensers and eyewash stations for first aid.

Different installation types, such as flush installation, fitted with marine edge, underslung and welded without joints

Top-mounted basin

All-around marine edge; larger than the worktop opening

Built-in basin

Set into the worktop

Welded-in basin

Welded seamlessly into the worktop

Underslung basin

Fastened underneath the worktop

	Materials	Widths	Depths	Confi guration options
Basins	Ceramic, stainless steel, polypropylene, epoxy	250 - 895	100 - 500	Top mounted, flush mounted, underslung
Sinks	Ceramic, stainless steel, polypropylene	1200	600 \| 750	Basin left/centre/right, with/without drainboard
Front sinks	Ceramic, stainless steel. polypropylene, epoxy, Trespa® TopLab® Plus	1350/1500/1650/1800/1950	680	Basin central, drainboard left and right

Dimensions in mm

Product data

EXPLORIS® Laboratory sinks and
basins, together with water fittings, draining racks, soap and towel dispensers and eye showers, form a well-equipped cleaning workplace You can find the different sizes and possible combinations here.

Chemical storage cabinet

For a healthy laboratory environment

Many chemicals required in the laboratory release gases during storage. These are not only unpleasant because of their smell, but may also be harmful to the health of the employees in the laboratory. With an EXPLORIS® chemical storage cabinet, such problems simply disappear because the gases of the stored chemicals are efficiently extracted before reaching the laboratory air.

Chemical storage cabinet

For a healthy laboratory environment

Many chemicals required in the laboratory release gases during storage. These are not only unpleasant because of their smell, but may also be harmful to the health of the employees in the laboratory. With an EXPLORIS® chemical storage cabinet, such problems simply disappear because the gases of the stored chemicals are efficiently extracted before reaching the laboratory air.

Safe storage of aggressive non-flammable chemicals and toxic substances

Effective vapour extraction

Optional lockable compartment for toxic chemicals,
available as a built-in compartment or as a
separate wall-mounted cabinet

Available as tall cabinets or underbench cabinets

Electrolytically galvanised steel

Colour: Arctic White similar to RAL Design 260 90 05

Doors are noise-insulated and double-walled

With shelves or ergonomic full-extension drawers

Safe storage of aggressive non-flammable chemicals and toxic substances

Effective vapour extraction

Optional lockable compartment for toxic chemicals,
available as a built-in compartment or as a
separate wall-mounted cabinet

Available as tall cabinets or underbench cabinets

Electrolytically galvanised steel

Colour: Arctic White similar to RAL Design 260 90 05

Doors are noise-insulated and double-walled

With shelves or ergonomic full-extension drawers

	Width	Height	Depth
Tall cabinets, 1 door left/right	600	1920	516
Tall cabinets, 2 doors	900/1200	1920	516

Dimensions in mm

	Width	Height	Depth
Tall cabinets, 1 door left/right	600	720	516
Tall cabinets, 2 doors	900/1200	720	516

Abmessungen in mm

Product data

Vapours from stored chemicals are effectively extracted so that they do not enter the laboratory air. Below you will find information on the different design variants.

Underbench safety cabinet

Safety and comfort

EXPLORIS® underbench safety cabinets are used for the unrestricted storage of flammable hazardous substances in laboratory rooms according to DIN EN 14470-1. With a fire resistance of type 90 it protects long enough to leave the room.

Underbench safety cabinet

Safety and comfort

EXPLORIS® underbench safety cabinets are used for the unrestricted storage of flammable hazardous substances in laboratory rooms according to DIN EN 14470-1. With a fire resistance of type 90 it protects long enough to leave the room.

Underbench safety cabinets are storage marvels, with twice as much storage capacity for 1-litre bottles compared with conventional cabinets

Top fire resistance class (Type 90)

Proven safety: Certified compliant with EN 14470-1 and GS

Underbench cabinets for the direct use of solvents in the workspace

Hinged doors and/or pull-outs

Canister with fill level monitoring

Optional second level of pull-outs

Adjustable door damping ensures more comfort when filling or removing

Underbench safety cabinets are storage marvels, with twice as much storage capacity for 1-litre bottles compared with conventional cabinets

Top fire resistance class (Type 90)

Proven safety: Certified compliant with EN 14470-1 and GS

Underbench cabinets for the direct use of solvents in the workspace

Hinged doors and/or pull-outs

Canister with fill level monitoring

Optional second level of pull-outs

Adjustable door damping ensures more comfort when filling or removing

	Width	Height	Depth
1 pull-out	590/890	710	574
2 pull-outs	1100/1400	710	574
2 hinged doors	1100	710	574
22 hinged doors, 1 pull-out	1400	710	574

Dimensions in mm

Product data

Optionally with hinged doors or pull-outs – these can even be fitted with a second pull-out level. Below you will find information on the different design variants.